|
INTRODUCTION
BOOSTPOWER
USA INC. is an exclusive worldwide provider of High
Performance Automotive and Marine Engines, Parts and
Accessories. We offer cutting edge technology in which
is responsible for the fastest most reliable vehicles
in the World. BOOSTPOWER USA is a One-Stop Shop
for your Engine & Powertrain needs. BOOSTPOWER USA
INC. has award winning engine designs from 500 to the
1,500 Horsepower range on gasoline. Not only do
we build and test these High Performance Products, we
also put them to the ultimate test on brutal tracks
and the Open Ocean Offshore Racing conditions. BOOSTPOWER
USA’S Research and Development Facility is equipped
with state-of-the-art Engine Equipment and Multiple
Dyno Testing Cells to provide the ultimate in future
technology and reliable performance.
ENGINES &
DRIVES
BOOSTPOWER
USA INC. offers Normally Aspirated High Performance
Complete Race Engines, Partial Engines, Assembled Short-Blocks,
Balanced Rotating Assemblies,Custom Cylinder Heads,
and all the other Hardcore Engine Internal Parts necessary
to complete a reliable performance project. We also
Specialize in Custom Turbocharged and Supercharged Carbureted
and Fuel Injected Complete V8 Endurance Dry Sump Power
Plants ranging from 300 to 700+ Cubic Inches. BOOSTPOWER’s
years of building, competing and tuning these mighty
power plants assures you of a winning reliable combination
right from the start.
BOOSTPOWER USA INC. further specializes in all the necessary Drive
& Transmission Hardware to apply the Horsepower
& Torque to the Street or Water. BOOSTPOWER USA
INC. Specializes in Custom Transmission/Drive Building,
Preparation & Repair. We are a Mercury / Volvo High
Performance Drive Specialist. We perform upgrades and
custom lower unit set ups in house on a daily basis.
We also set up custom Street Computer controlled Transmissions
and Heavy Duty Torque Converters. BOOSTPOWER USA INC.
also offers Transmission & Double Carbon Clutch
Upgrades to most Popular Import Performance Vehicles.
BOOSTPOWER
USA INC. can set you up with the proper Powertrain system
for your Vehicle/Vessel at Competitive pricing.
SHORT-BLOCK KITS
Seven different winning designs have
been produced. The Sizes include 502, 509, 540, 557,
572, 605 and 632+ cubic-inches. BOOSTPOWER USA INC. offers complete Short-Block
Kits for you “Do It Yourselfers!” When you demand the highest quality (In Stock) Short-Blocks at
best prices, contact BOOSTPOWER USA INC.
SUPERCHARGERS,
TURBOCHARGERS AND NITROUS OXIDE
BOOSTPOWER USA INC. develops several
concept and production Supercharger and Turbocharger
Kits. These include kit modifications in which are designed for Roots-Type,
Screw and Centrifugal Superchargers from, Weiand, Blower
Drive Service, The Blower Shop, ProCharger, Vortech,
Paxton, Powerdyne, Littlefield, Eaton, Magnuson and
Lysholm. We also offer Turbochargers & related parts
from Gentry, Turbonetics, Blitz, HKS, TurboXs, Banks,
and several other leading manufacturers.
BOOSTPOWER USA INC. offers custom
Automotive & Marine Nitrous Oxide Systems adding
additional horsepower from 100 to 300 at the touch of
a button. We Specialize in Fabricating Custom N2O
Systems for just about any application.
MERCRUISER 496, 502 AND SCI ENGINES
BOOSTPOWER USA has designed several OEM aftermarket
specialty products along with Supercharger Systems that
operate via Fuel Computer which is installed inline
with the factory wiring ECM & wire harness.
It can then be plugged into a laptop computer
to adjust all parameters of the engine. The end result is a fully tunable 200 horsepower
minimum increase in power over stock specs. BOOSTPOWER
USA INC. offers several Tuner Kits for people who want
to fabricate a Supercharger or Turbocharger to a Custom
Application. We can set up a Custom Kit predicated to
your needs. Contact a BOOSTPOWER USA rep to discuss
the best reliable upgrade for your existing OEM Mercury
or Volvo Engine Package.
RIGGING
BOOSTPOWER USA INC. has expert technicians
who can custom fabricate and develop virtually any Prototype
Part Necessary for your custom Bilge or Underhood application. We sell all of the High Performance Rigging Parts and we also
design many custom parts to enhance factory setups.
BOOSTPOWER USA INC. has several custom Rigging parts
in which ease the Engine & Powertrain Installations
and make them aesthetically presentable & unique.
EFI
TUNING & DYNO SERVICE
BOOSTPOWER
USA INC. offers complete Professional Dyno Testing &
Tuning Service. BOOSTPOWER offers a State of the Art
Engine Test Cell, Prop Shaft Dynamometer and a Floor
Roller Automotive Dyno. All Machines are capable of
holding a minimum of 1200Ft Lbs of Torque and
offer extensive Data Logging Information. BOOSTPOWER
USA INC. offers Laptop Tuning for all Popular Systems
such as, FAST, ACCEL/DFI, EFI TECHNOLOGIES, PECTEL,
MEFI-DELPHI, MOTOTRON, MOTOROLA, HOLLEY COMMANDER, AUTRONIC,
MOTEC, And several other popular OEM and Aftermarket
brands. We also offer ECM RE-FLASHING/CALIBRATING SERVICE.
OUR MISSION
At BOOSTPOWER USA INC. our mission
is to Research and Develop the most sophisticated Products
in the Automotive and Marine Industry and furthermore
offer them to the public Tested and at a Competitive
Pricing! We appreciate your time in reading our
“About Us” introduction.
Now take a few more minutes and BROWSE the rest
of our web site.
BOOSTPOWER
USA INC. Offers QUALITY PRODUCTS at Competitive Pricing!
CALL NOW TO SPEAK WITH A HIGHLY TRAINED SALESPERSON!
877-BPOWER4-U
FOR MORE INFO ON PURCHASABLE CONCEPTS OR LICENCING
AGREEMENT OPTIONS, PLEASE CONTACT US VIA
E-MAIL SERVICE@BOOSTPOWER.COM
|
